cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
346
Views
0
Helpful
1
Replies
bschear
Beginner

UCM 6.12 Database Replication Status

I had some problems with phones registered to my subscriber and had to reboot. Is it normal in real time monitoring tool for the replication status on the subscriber to be 0? Both the publisher and Cluster show a status of 2.

1 ACCEPTED SOLUTION

Accepted Solutions
jguggehe
Cisco Employee

You might want to try a utils dbreplication reset all

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/7_0_1/cli_ref.html#wp62592

Give it about an hour or so and see what your replication status is.

Hope this helps! If you find this post useful, please rate it.

Thanks,

John

View solution in original post

1 REPLY 1
jguggehe
Cisco Employee

You might want to try a utils dbreplication reset all

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cli_ref/7_0_1/cli_ref.html#wp62592

Give it about an hour or so and see what your replication status is.

Hope this helps! If you find this post useful, please rate it.

Thanks,

John

View solution in original post

Content for Community-Ad

Spotlight Awards 2021