I am a Cisco Partner, often quoting UCM 8.0 to 9.0 migration for various clients.
I understand how to quote a migration of their current phones into Essential/Basic/Enhanced, etc. licences.
But when it comes to unused DLUs, I have a problem with quoting them a upgrade for TOTAL number of users (including those future users, that will come out of those UNUSED DLUs).
I need to do it BEFORE doing actual upgrade - since we sell them an upgrade (in case their support expired), place an order with Cisco, and before that - we need to calculate it right, and without ELM present in their systems.
For example - there are 29 DLUs Unused.
How do I plan user count and UCSS and ESW for them - out of which conversion ratios?
For instance that could be 9 phones of 7911G model (27 DLUs), with 2 DLUs left for 2 IP Communicator Adjunct (2 DLUs). Which would lead to 7 Enhanced and 2 Enhanced Plus.
Or I could imagine that (less favourable for client) those 29 DLUs are meant for 7975 phones (5 DLUs each), - then it would be only 5 Enhanced Licenses 25 DLUs), and 3 will be lost.
So, even on a small amount of DLUs (29) - I just got two resluts of 7Enh+2EnhPlus, or 5 Enhanced. This is quite a difference, isn't it?
So my question is - where I can find conversion RULES to plan in ADVANCED all Unused DLU migration, without using ELM wizard.
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...
UCCX does not natively protect HTTP Triggers.
I wanted to come up with a solution to handle HTTP cookie based authentication.
There is a zip file for this project attached to this article. It was written on UCCX 12.5...
CUCM can backup the manually or have sehchduler to backup the configuration and historical reports from the server diester recovery systemStep 1. Navigate to CUCM > Disaster Recovery System > Backup > Manual Backup as shown in the...