UCSC-C220 installation problem

[syed ethesham ul Hussain]

Hi,

We have purchased two UCSC-C220-M3S v01 for Call Manager  9.1. It was supplied without CD ROM drive.

I had connected  external CD ROM drive and boot with supplied Call Manager DVD.

After I had selected my external CD ROM in Boot Menu, it boots with the DVD and gives error

Unknown iterrupt or fault at EIP 00000060

Kindly advice.

[Aaron Harrison · Accepted solution]

Hi

You can't install CUCM directly on a UCS server.

You must first install VMware, and then build CUCM as a virtual machine.

http://docwiki.cisco.com/wiki/Unified_Communications_in_a_Virtualized_Environment

Regards

Aaron

[syed ethesham ul Hussain]

Hi,

How can i install VMware on this server. AS no media is supplied with the server for VMware.

Can you provide me any info where can i find the software and document to build CUCM.

Will it be same for my second server if i need to install Presence on it.

Kindly advice.

Ehtesham

[Aaron Harrison · Accepted solution]

Hi

You need to purchase VMware yourself or from Cisco.

You can download it from VMware for free and run it as evaluation until you have the licenses.

Yes, it would be the same for any UC product - they all require VMware on UCS servers.

Aaron

[syed ethesham ul Hussain]

Hi Harrison,

I had found in BOQ  licence for VMware 

Cisco UC Virt. Foundation 5.0 (2-Socket 32GB vRAM)

R-VMW-UC-FND5-K9

1

UCSS Cisco UC Virt. Foundation Three Year - 1 server

UCSS-U-VMW-FND-3-1

1

Cisco UC Virt. Foundation 5.0 SnS

VMW-UC-FND5-SNS

1

It seems i need to download VMware from vendor site and do the installation.l

Should this be enough to make installation of call manager on one server and Presence on another server.

Thanks for your support.

[Gregory Brunn]

Syed,

This is licensing for Cisco Virtual Foundation 5.0 for 1 CPU for 3 years. 

Here are some site you may want to visit and check out

http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_Unified_Communications_Manager_(CUCM)

http://docwiki.cisco.com/wiki/Unified_Communications_in_a_Virtualized_Environment

[Hythim Ali El Hadad]

Hi,

How can I get the cisco virtualization foundation software and license

I see them in BOM

Are they e-delivery or I should find their shipped with my UCS onsite ?

And if e-delivery, will i receive a link to download the software

Thanks a lot for your help

Regards

Haitham

[Rajan R]

Go to vmware.com download page and search for "Cisco". There is a custom Cisco VM Ware Image. Download that, burn it on to a CD and run it on the UCS.

Get VSphere Client for Windows from vmware.com download page. Put the IP of the VMware server you just installed.

Hope this Helps

VR

[Hythim Ali El Hadad]

Thanks Raju

I checked vmware site but for cisco foundation

Cisco word only got it

Thanks

Haitham