cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
351
Views
0
Helpful
3
Replies
mohdibrahim01
Beginner

UCSD - NetApp Solidfire integration

 

 

Hi,

 

we have CUCM cluster version 11.5 and for business partner ship we need to connect to our new partner CUCM also 11.5 over MPLS link to make video calls between two clusters .

 

each cluster under its own administration and due security concerns     only the IP of call manager can be routed across the MPLS. 

 

kindly advise the best setup to achieve this and if the end points in this case DX80 can establish the calls only through the SIP Trunk ?

 

Thanks in Advance .

 

Ibrahim

3 REPLIES 3
Jaime Valencia
Hall of Fame Cisco Employee

You would need to use TRP or MTP in order to make that happen, and depending on the amount of calls, that might not scale.

HTH

java

if this helps, please rate

Hi jaime ,

 

can you explain with is the  requirement to use   TRP or MTP and if their any alternative solution.

 

 

Thanks,

 

ibrahim   

Jaime Valencia
Hall of Fame Cisco Employee

https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/200613-Configure-Media-Termination-Point.html

 

https://www.netcraftsmen.com/trusted-relay-point-trp-and-qos-for-softphones/

 

Plenty of more info on the topic if you google

 

Based on your requirements of only allowing the CUCM's IP to be allowed, no, that's your solution.

HTH

java

if this helps, please rate
Create
Recognize Your Peers
Content for Community-Ad