02-05-2010 05:28 PM - edited 03-15-2019 09:20 PM
I have a Call Manager Business Edition with a 2851 SRST voice gateway. When is SRST mode the sets register but I am unable to make a outbound call. I have turned on the debug isdn q931 but do not see the phone hitting the gateway while making the outbound call. I have some dial-peers configured but not sure why their are not being used. Am I mising somthing?
02-06-2010 11:47 AM
Lyle,
The "ip source-address 172.19.121.52 port 2000" command should be changed to "ip source-address 172.16.32.9 port 2000". It needs to be the ip of the voice gateway. I think that should do the trick.
Jason
02-08-2010 08:00 AM
I have changed the sourse IP address to be the SRST router and I still can not make an outbound call. I have turned on the deb isdn q931 and do not see the calls hitting the gateway. What else is wrong or what more could be missing?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide