cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
930
Views
0
Helpful
3
Replies

unable to register cisco phone 8821 into the CUCM

gimp
Level 1
Level 1

Hi,

I have 5 Cisco Wireless IP PHONE 8821 with sip8821.11-0-2SR2-1, Boot Load id sb28821.HE-01-019 and CUCM with 9.1.2.12901-3 software version.

I try to registered the Wireless IP Phone into the CUCM but it failed. I used the following release versions:

cmterm-8821-sip.11-0-2-2.k3.cop.sgn

cmterm-8821-sip.11-0-3SR1-1.k3.cop.sgn

cmterm-8821-sip.11-0-3SR2-1.k3.cop.sgn

The softwares are loaded correctly into the CUCM but the new device cisco IP PHONE 8821 does not compare into device Device Defaults menù.

I see the compatibility version between IP PHONE and CUCM from Cisco.com:

From Cisco Wireless IP Phone 8821 Data Sheet:

http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/wireless-ip-phone-8821/datasheet-c78-737346.html

Any Suggestion ?

Best Regards

Michele Rossi

3 Replies 3

Manish Gogna
Cisco Employee
Cisco Employee

Hi Michael,

Please install the latest device pack for cucm 9.1.2 on all nodes of cucm cluster followed by a cluster reboot.

Manish

- Do rate helpful posts -

Hi Manish,

I've the devices list below:

CTI Port SCCP 28
CTI Route Point SCCP 2
Cisco 7905 SCCP 1
Cisco 7906 SCCP 3
Cisco 7911 SCCP 2
Cisco 7912 SCCP 59
Cisco 7921 SCCP 8
Cisco 7925 SCCP 11
Cisco 7936 SCCP 1
Cisco 7940 SCCP 202
Cisco 7942 SCCP 106
Cisco 7945 SCCP 6
Cisco 7960 SCCP 2
Cisco 7970 SCCP 10
Cisco 7975 SCCP 2
Cisco 8811 SIP 28
Cisco ATA 186 SCCP 17
Cisco IP Communicator SCCP 46
Conference Bridge Unicast Bridge 2
H.323 Gateway H.225 7
Media Termination Point Unicast Bridge 2
Music On Hold SCCP 2
Route List SCCP 8
Tone Announcement Player SCCP 2
Universal Device Template SIP 1

Does the last device packages support all devices just registered ??

thanks

Hi,

You can download and install the latest device pack for 9.1.2 ( 9.1.2_17151-1 ) from here

https://software.cisco.com/download/release.html?mdfid=284510097&flowid=77894&softwareid=282074299&release=9.1(2.17151)&relind=AVAILABLE&rellifecycle=&reltype=latest

Here is the Read me file that contains the info about 8821 load that comes with this device pack to enable the registration of 8821

http://www.cisco.com/web/software/282074299/137891/cmterm-devicepack9.1.2_17151-1_Release_Notes.pdf

Manish

- Do rate helpful posts -