Unity 2.64 and CCM 4.3 - Will it work?

[Andri_Try]

Hi all,

I'm having problems finding out wether Unity 2.46 and CCM 4.3(2) will work together.

I'm currently using Unity 2.46 and CCM 4.2(3) without any problems.

Has anyone out there used those two versions together and how did it go?

Can someone point me towards some documentation containing compatibility matrix for Unity 2.64?

thanks,

[Rob Huffman]

Hi Andri,

I don't think you will find any support docs (or TAC support) for this Unity version, but

if it's running with CCM 4.2 then it "may" work with CUCM 4.3

Here is the latest Unity Compatibility Matrix which only goes as far back as 4.0(1)

Supported Version Combinations for Cisco Unity, the Cisco Unity-CM TSP, and Cisco Unified Communications Manager

From this compatability Matrix;

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html#wp51076

Here is the only 2.4(6) Matrix I can find. it only goes up to CCM 3.2

Compatibility Matrix: Cisco Unity, the AV-Cisco TSP, and Cisco CallManager

http://www.cisco.com/en/US/docs/voice_ip_comm/unity/2x/requirements/246SysRq.html#wp1023205

End-of-Sale and End-of-Life Announcement for the Cisco Unity 2.46

Last Date of Support:March 16, 2004

   
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps2237/prod_end-of-life_notice0900aecd8063c7f2.html

Cheers!

Rob

Please support CSC Helps Haiti

https://supportforums.cisco.com/docs/DOC-8895

https://supportforums.cisco.com/docs/DOC-8727