cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
595
Views
0
Helpful
1
Replies

Unity Express License for Port

vinhnguyen
Level 1
Level 1

Hi

I install Unity Express on ISM module and install one of the license.  I did a "show license all" and got the following output

cueCMI# show license all
License Store: Primary License Storage
StoreIndex:  0  Feature: VMIVR-VM-MBX                      Version: 1.0
        License Type: Permanent
        License State: Active, Not in Use
        License Count: 5 / 0
        License Priority: Medium
License Store: Evaluation License Storage
StoreIndex:  0  Feature: VMIVR-VM-MBX                      Version: 1.0
        License Type: Evaluation
        License State: Inactive
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  8 weeks  4 days
        License Count: 600 / 0
        License Priority: None
License Store: Evaluation License Storage
StoreIndex:  1  Feature: VMIVR-PORT                        Version: 1.0
        License Type: Evaluation
        License State: Active, Not in Use, EULA not accepted
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  8 weeks  4 days
        License Count: 60 / 0
        License Priority: None
License Store: Evaluation License Storage
StoreIndex:  2  Feature: VMIVR-IVR-SESS                    Version: 1.0
        License Type: Evaluation
        License State: Active, Not in Use, EULA not accepted
            Evaluation total period:  8 weeks  4 days
            Evaluation period left:  8 weeks  4 days
        License Count: 60 / 0
        License Priority: None

Do I need the VMIVR-PORT license in order for system to work?  Could someone send me a working system output.

Thanks

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi Vinh,

You do need the "Ports"

I think your problem lies with the IVR - sessions (the 60 sessions are using all 60 available Ports);

To get you started running use;

service-module# no license activate ivr sessions 


Then you will be able to use the VM feature.


https://supportforums.cisco.com/message/3162855#3162855


From Amit,

https://www.myciscocommunity.com/docs/DOC-17720


Cheers!
Rob