04-21-2008 11:07 AM - edited 03-15-2019 10:11 AM
Team,
I have a router showing the following:
sh voice port summary | i seized
2/0/0:0 09 e&m-wnk up up seized seized y
2/0/0:0 10 e&m-wnk up up seized seized y
2/0/0:0 11 e&m-wnk up up seized seized y
2/0/0:0 13 e&m-wnk up up seized seized y
2/0/1:0 14 e&m-wnk up up seized seized y
3/0/0:0 01 e&m-wnk up up seized seized y
3/0/0:0 02 e&m-wnk up up seized seized y
3/0/0:0 14 e&m-wnk up up seized seized y
what is:
up up seized seized
VS.
other status i have seen before.
is there a good doc that exapling ONLY what this status means.
DSP is showing ok.
this is a CAS setup to an alcatel PBX.
thanks
Solved! Go to Solution.
04-21-2008 12:48 PM
Seized in telephony is an engaged circuit. the verbose output is show voice-port and the complete explanation is in the command reference.
04-21-2008 12:48 PM
Seized in telephony is an engaged circuit. the verbose output is show voice-port and the complete explanation is in the command reference.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: