07-18-2011 07:17 AM - edited 03-16-2019 05:59 AM
I can't find the 8945 listed on any compatibility matrix.
Update:
I can now download IOS 15.2.1T which I believe has SRST 8.6. But according to this:
the 8945's are still not supported.
Am I reading this wrong?
Solved! Go to Solution.
07-18-2011 08:14 AM
hi,
8945 is supported from cme 8.8
cme 8.8 (15.2.1T) is likely to released by end of July this year.
Thanks,
Karthik
07-18-2011 09:13 AM
Unfortunately No.
8945 CME/ SRST will only work with cme 8.8 (15.2.1T)
07-18-2011 09:36 AM
Look at this link this is the link for the phones we support in srst 8.6 .
http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/requirements/guide/srs86spc.htm
In the 89XX series of phones you will find 8961 but not 8945.
Hence this means that we do not support srst for 8945 in cme versions lower than cme/srst 8.8.
Hope this helps!
Thanks,
Karthik
09-12-2011 10:18 AM
Hi there,
Yes, according to this SRST reference
Cheers!
Rob
07-18-2011 08:14 AM
hi,
8945 is supported from cme 8.8
cme 8.8 (15.2.1T) is likely to released by end of July this year.
Thanks,
Karthik
07-18-2011 08:56 AM
Thanks! Just one follow up question: Will 8945 register via srst to a lower than 15.2.1T ios?
07-18-2011 09:13 AM
Unfortunately No.
8945 CME/ SRST will only work with cme 8.8 (15.2.1T)
07-18-2011 09:14 AM
Do you have a link that goes over that?
07-18-2011 09:36 AM
Look at this link this is the link for the phones we support in srst 8.6 .
http://www.cisco.com/en/US/docs/voice_ip_comm/cusrst/requirements/guide/srs86spc.htm
In the 89XX series of phones you will find 8961 but not 8945.
Hence this means that we do not support srst for 8945 in cme versions lower than cme/srst 8.8.
Hope this helps!
Thanks,
Karthik
07-18-2011 09:51 AM
Thanks for the info! I appreciate it.
09-12-2011 09:19 AM
Bumping the thread since I updated the original question.
09-12-2011 10:18 AM
Hi there,
Yes, according to this SRST reference
Cheers!
Rob
09-12-2011 01:03 PM
Thanks!
I just haven't got the knack for finding the info I need yet.
01-18-2013 02:19 AM
Hi there,
I have a working CME 8.8 system using different type of IP Phones.
Everything's working fine but the 8945 phones.
The problem is that they can register , but they can't update to the french locale.
Any idea guys?
Thank you in advance
01-18-2013 02:27 AM
HI
Please upgrade to CME 9.0 and install the french locale.
Regards
Ronak Patel
Rate helpful posts.
01-18-2013 07:26 AM
Hi,
We upgraded to CME 9.1 and we still have the same problem, 8945 ip phones can't update to french.
Any help will be appreciated,
Many thanks
01-18-2013 01:27 PM
we resolved this problem by using the latest Local: CME-locale-fr_FR-French-8.8.2.5 instead of CME-locale-fr_FR-French-8.8.2.3. But we still have a problem with accented letters (é à è ù ...) that doesn't appear correctly on IP Phones 8945 !!
unfortunately Cisco TAC says that is a "BUG that has been active for some time now and affects most phones and platforms and its currently being tracked with this ID CSCuc51096 "!!
Best regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: