cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
3248
Views
0
Helpful
4
Replies
Highlighted
Beginner

Upgrade 7821 from 3PCC mode

Hi, 

Hopefully an easy question for someone. We've been shipped a 7821 IP phone but it's got the 3rd Party Call Control software on it. I'd read that I should be able to upgrade to enterprise using this:

http://<phone_ip>/admin/upgrade?<schema>://<serv_ip[:port]>/filepath

However, what is the schema referring to? Can anyone give me an example URL? Or let me know how to upgrade it to a normal software version. Our normal version is 10.3.1.12

Thanks, Will

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Hello Will,

You can check this link:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7800-series/3pcc/english/release-notes/PA2D_BK_7C8E9902_00_7800-series-3pcc-rn-1031.html#task_F498FAF5A42BC77BB04851885DCF3B97

Note: After you upgrade to the enterprise firmware, you cannot revert to the third-party call control firmware.

Step 1   Put the enterprise image (for example, cmterm-78xx-sip.10-x-x-x.cop.sgn) on the download server.
Step 2   Ensure that Enable_Enterprise_Image_Upgrade is set to yes on the Provisioning tab in the web page.
Step 3  

Configure the Upgrade Rule on the Provisioning tab.

Hope this works.

Sincerely,

Shubhamoy

View solution in original post

4 REPLIES 4
Highlighted
Beginner

Hello Will,

You can check this link:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7800-series/3pcc/english/release-notes/PA2D_BK_7C8E9902_00_7800-series-3pcc-rn-1031.html#task_F498FAF5A42BC77BB04851885DCF3B97

Note: After you upgrade to the enterprise firmware, you cannot revert to the third-party call control firmware.

Step 1   Put the enterprise image (for example, cmterm-78xx-sip.10-x-x-x.cop.sgn) on the download server.
Step 2   Ensure that Enable_Enterprise_Image_Upgrade is set to yes on the Provisioning tab in the web page.
Step 3  

Configure the Upgrade Rule on the Provisioning tab.

Hope this works.

Sincerely,

Shubhamoy

View solution in original post

Highlighted

Hello Will and Shusharka

Thanks for work in this topic. Actually we have 7821 phones, that we need to register on Asterisk, then we are trying to upgrade to version 3rd Party Call Control. Can you explain what means <Configure the Upgrade Rule on the Provisioning tab in the web page with the valid URL>.  I do not know where is the Provisioned tab. How we can do that procedure. we appreciate if you give me more details.

Actually we have created a XMLDefault.cnf.xml file and put the the loadinformation sintax for instruct the phone to upgrade. This file is on the tftp sever but the proccess does not complete.

Thanks for your help

Highlighted

Response has been posted for your query in a separate discussion.

https://supportforums.cisco.com/discussion/13073431/upgrade-cisco-phone-3rd-party-call-control

Highlighted

Managed to upgrade to enterprise version. I could have sworn I clicked on the admin and advanced settings, but eventually found the provisioning tab.

I just did this step:

In the Firmware Upgrade section, choose Yes from the Enable Enterprise Image Upgrade drop-down list box.

save the settings then entered the upgrade URL

http://<phone IP>/admin/upgrade?tftp://<tftp-server-IP>/sip78xx.10-3-1-12.loads

Had to do a reset on the phone after the upgrade as it didn't pick up the directory number for some reason.

Thanks for your help.

Edit: After upgrading to v11 of CUCM, I wasn't able to point the URL to the TFTP server of CUCM. I had to download the zip file for the firmware and put the entire contents of that zip in upload directory on a local tftp server, and then upgrade the phone, using the same method above.