cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

1093
Views
0
Helpful
2
Replies
Highlighted
paa Beginner
Beginner

Upgrade Callmanager 7.0.1 to 7.0.2

Hi!

I have a problem with upgrade UCM to recent version. I have fresh UCM 7.0.1.11000-2. I downloaded UCM upgrade UCSInstall_UCOS_7.0.2.20000-5.sgn.iso (both files). When I tryed to upgrade UCM, I got this error "The version number inside the selected upgrade does not match the filename". How can I fix this error? Should I first upgrade UCM to SU1a release?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Community Legend

Re: Upgrade Callmanager 7.0.1 to 7.0.2

Hi Alexander,

This type of error can be caused when combining the 2.iso files. Check that the "final" filename is correct :)

Because of its size, the UCSInstall iso file, UCOS_7.0.2.20000-5.sgn.iso, comprises two parts:

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2

Procedure

Step 1 From www.cisco.com, download the two UCSInstall files.

Step 2 To reunite the two parts of the file, execute one of the following command.

Note Because the 7.0.2.20000-5 build is a nonbootable ISO, it proves useful only for upgrades. You cannot use it for new installations.

a. If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 > UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

b. If you have a Windows system, cut and paste the following command from this document into the

command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2+UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

Step 3 Use an md5sum utility to verify that the MD5 sum of the final file is correct.

03dcc9defcef6ba3d1196ea4820c7eae UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_2/cucm-rel_notes-702a.pdf

Hope this helps!

Rob

View solution in original post

2 REPLIES 2
Hall of Fame Community Legend

Re: Upgrade Callmanager 7.0.1 to 7.0.2

Hi Alexander,

This type of error can be caused when combining the 2.iso files. Check that the "final" filename is correct :)

Because of its size, the UCSInstall iso file, UCOS_7.0.2.20000-5.sgn.iso, comprises two parts:

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2

Procedure

Step 1 From www.cisco.com, download the two UCSInstall files.

Step 2 To reunite the two parts of the file, execute one of the following command.

Note Because the 7.0.2.20000-5 build is a nonbootable ISO, it proves useful only for upgrades. You cannot use it for new installations.

a. If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 > UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

b. If you have a Windows system, cut and paste the following command from this document into the

command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2+UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

Step 3 Use an md5sum utility to verify that the MD5 sum of the final file is correct.

03dcc9defcef6ba3d1196ea4820c7eae UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_2/cucm-rel_notes-702a.pdf

Hope this helps!

Rob

Hall of Fame Community Legend

Re: Upgrade Callmanager 7.0.1 to 7.0.2

Hi Alexander,

This type of error can be caused when combining the 2.iso files. Check that the "final" filename is correct :)

Because of its size, the UCSInstall iso file, UCOS_7.0.2.20000-5.sgn.iso, comprises two parts:

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2

• UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2

Procedure

Step 1 From www.cisco.com, download the two UCSInstall files.

Step 2 To reunite the two parts of the file, execute one of the following command.

Note Because the 7.0.2.20000-5 build is a nonbootable ISO, it proves useful only for upgrades. You cannot use it for new installations.

a. If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 > UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

b. If you have a Windows system, cut and paste the following command from this document into the

command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part1of2+UCSInstall_UCOS_7.0.2.20000-5.sgn.iso_part2of2 UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

Step 3 Use an md5sum utility to verify that the MD5 sum of the final file is correct.

03dcc9defcef6ba3d1196ea4820c7eae UCSInstall_UCOS_7.0.2.20000-5.sgn.iso

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_2/cucm-rel_notes-702a.pdf

Hope this helps!

Rob

View solution in original post

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here