Upgrade cucm 6.1.2 to 7.1(5)

[Asif P Abubackar]

Hi All,

Can I upgrade to cucm 7.1.5 from 6.1.2. Hws the upgrade path, it would be great if someone can guide me

Thanks

Asif

[phooghen]

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp288546

Cisco Unified Communications Manager	7.1(5)
System Version	7.1.5.10000-12
Release Date	Apr 19 2010
Standard Support	Direct upgrade: 7.1(3b)SU2, 7.1(3b)SU1, 7.1(3b), 7.1(3a)SU1a, 7.1(3a)SU1, 7.1(3a), 7.1(3), 7.1(2b)SU1, 7.1(2b), 7.1(2a) SU1, 7.1(2a), 7.1(2), 7.0(2a)SU3, 7.0(2a)SU2, 7.0(2a)SU1, 7.0(2a), 7.0(2), 6.1(5)SU2, 6.1(5)SU1, 6.1(5), 6.1(4a)SU2, 6.1(4a), 6.1(4)SU1, 6.1(4), 6.1(3b)SU1, 6.1(3b), 6.1(3a), 6.1(3), 5.1(3g), 5.1(3f), 5.1(3e)1, 5.1(3d), 5.1(3c), 5.1(3b), 5.1(3a), 5.1(3)

Direct upgrade from 6.1.2 to 7.1.5 is not supported.

It should be a 2 steps process.

From 6.1.2 to 6.1.3, then from 6.1.3 to 7.1.5

Pierre.

[Asif P Abubackar]

Thank you for the reply. I will tryi in two when I get the licese file for the same.

Is it possible for me to use 6.1.2 attendant console software with 7.1(5) version.

Regards

Asif

[MMstre]

Asif,

Did you figure this out?

I am trying to see if AC can be used with 7.1.5

thanks,

Mike

[Asif P Abubackar]

Yes Mike.

We can use the same software with 7.1.5, I used the the one with 6.1.2. Also if it is an upgrade you will even get AC in plugin with 7.1.5.

Regards

Asif

[MMstre]

Thank you Asif,

this is very helpful!

Mike

[nitsinha]

Hi Asif,

Check the Call manager software compatibility matrix

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html

Upgrade from 6.1.2 to 7.1.5 is not a direct upgrade. Check the doc for the more details.

HTH

Regards

Nitesh

PS: Pl rate helpful posts