cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
562
Views
0
Helpful
2
Replies

Upgrading IOS loses access to CME web console

john.cheetley
Level 1
Level 1

To the 79xx iptel techs out there,

Just upgraded from cme 4.1 c2691 ipvoice to c2691entbasek9-mz.124-13b.bin version 12.4(13b)on a 2691 router

Before upgrade. Had access to web console but 7912G phone wouldn't register despite my labourious efforts

After upgrade. Have lost access to web console.

Can access http://ipaddress basic section showing diagnostics log, monitor the router etc but not the http://ipaddress/ccme.html

Gets "the webpage can't be found"

Using IE 8

Have all the necessary files for  cme 4.1

Enabled ip http path flash etc

Using local authentication

Have attached output of sh running config

Please assist further

Thanks in advance.

BTW.

Had lots of previous old discussions logged via site but seem to have disappeared.

If any one can assist with that please too...point me in the right direction..

Message was edited by: John Cheetley..sorry guys. Had power outage when was uploading attachment. Is there now. Thanks again

2 Replies 2

anyway we can see the "sh run" and "sh flash"?

Please Kudos/rate if this help!

Please Kudos/rate if this help!

Nadeem Ahmed
Cisco Employee
Cisco Employee

Show run is missing in attachment.


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: