cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1652
Views
30
Helpful
8
Replies

Upload files to CUCM via SSH CUCM 12.x

Alex Ribas
Level 1
Level 1
 
 

Is it possible to upload files via SSH direct to CUCM 12.x for service via ssh?

In other words without using the Call Manager GUI TFTP file management because the is 389Mb, instead use a SFTP client/server to transfer files to proper directory on CUCM TFTP server.
Any clue?

Thanks

Alex

 
2 Accepted Solutions

Accepted Solutions

As @Nithin Eluvathingal wrote you’re doing this the wrong way. The COP file is meant to be installed on each server in your CM cluster, not uploaded into the TFTP server as such. This is clearly outlined in the readme file for the COP file.



Response Signature


View solution in original post

8 Replies 8

What files are you uploading to CUCM ?

AFAIK there is no such option to copy files to CUCM using SSH command as you expect. There is no SFTP sever running on CUCM.

But you can download files from CUCM TFTP using  file get tftp

This command sends a TFTP file to another system by using SFTP.

 

 

Below mentioned are the available file command.



Response Signature


Hi Thank you

The file is:

cmterm-dx650.10-2-3-26.cop.sgn and IP tftp is 172.31.1.69

I didn't find the parameter to define the TFTP server

I tried 

1)    file get tftp 172.31.1.69/tftpboot/cmterm-dx650.10-2-3-26.cop.sgn

2)  file get tftp 172.31.1.69/cmterm-dx650.10-2-3-26.cop.sgn

no such file or directory can be found

But it is my tftpboot server I used it.

Any clue?

 

 

 

Those are firmware which must be installed on cucm using GUI OR CLI

From GUI using install/upgrade option and from cli using Utils  system upgrade initiate command.

 

what you are searching wound be found and you are doing it wrong.

 

 



Response Signature


Nops

The issue is the file size is 389Mb and look it.

Via GUI we have limitation 250Mb to upload.

AlexRibas_0-1675761234015.png

 

As I mentioned above cop files must be installed and not uploaded to tftp.

 



Response Signature


As @Nithin Eluvathingal wrote you’re doing this the wrong way. The COP file is meant to be installed on each server in your CM cluster, not uploaded into the TFTP server as such. This is clearly outlined in the readme file for the COP file.



Response Signature


Thank you all in that case I must use SFTP

AlexRibas_0-1675768867399.png

 

Or FTP would work as well.



Response Signature