Upload files to CUCM via SSH CUCM 12.x

[Alex Ribas]

 

Is it possible to upload files via SSH direct to CUCM 12.x for service via ssh?

In other words without using the Call Manager GUI TFTP file management because the is 389Mb, instead use a SFTP client/server to transfer files to proper directory on CUCM TFTP server.
Any clue?

Thanks

Alex

[Nithin Eluvathingal]

What files are you uploading to CUCM ?

AFAIK there is no such option to copy files to CUCM using SSH command as you expect. There is no SFTP sever running on CUCM.

But you can download files from CUCM TFTP using  file get tftp

This command sends a TFTP file to another system by using SFTP.

Below mentioned are the available file command.

• file build log
• file check
• file delete
• file delete tftp
• file dump
• file dump sftpdetails
• file dump tftp
• file fragmentation sdi
• file fragmentation sdl
• file get
• file get tftp
• file list
• file list tftp
• file search
• file search tftp
• file tail activelog
• file tail tftp
• file view
• file view tftp

[Alex Ribas]

Hi Thank you

The file is:

cmterm-dx650.10-2-3-26.cop.sgn and IP tftp is 172.31.1.69

I didn't find the parameter to define the TFTP server

I tried 

1)    file get tftp 172.31.1.69/tftpboot/cmterm-dx650.10-2-3-26.cop.sgn

2)  file get tftp 172.31.1.69/cmterm-dx650.10-2-3-26.cop.sgn

no such file or directory can be found

But it is my tftpboot server I used it.

Any clue?

[Nithin Eluvathingal]

Those are firmware which must be installed on cucm using GUI OR CLI

From GUI using install/upgrade option and from cli using Utils  system upgrade initiate command.

what you are searching wound be found and you are doing it wrong.

[Alex Ribas]

Nops

The issue is the file size is 389Mb and look it.

Via GUI we have limitation 250Mb to upload.

[Nithin Eluvathingal]

As I mentioned above cop files must be installed and not uploaded to tftp.

[Roger Kallberg · Accepted solution]

As @Nithin Eluvathingal wrote you’re doing this the wrong way. The COP file is meant to be installed on each server in your CM cluster, not uploaded into the TFTP server as such. This is clearly outlined in the readme file for the COP file.

[Alex Ribas]

Thank you all in that case I must use SFTP

[Roger Kallberg · Accepted solution]

Or FTP would work as well.