12-03-2010 05:31 AM - edited 03-16-2019 02:15 AM
Hi all,
Firstly, we have run into a serious issue in a remote office installation where it turns out that the voice card we have does not support voice. It is:
HWIC-4B-S/T
Now I need to know if the following card does support voice:
WIC-1B-S/T V3
Does anyone know if the above supports voice and if it does not, can you recommend a BRI card that will support voice?
Thanks
Solved! Go to Solution.
12-03-2010 05:39 AM
Hi Shane,
Sadly that module does not support Voice
Here is one choice;
VIC2-2BRI-NT/TE
http://www.cisco.com/en/US/prod/collateral/modules/ps5365/product_data_sheet0900aecd801c595e.html
Cheers!
Rob
12-03-2010 05:39 AM
Hi Shane,
Sadly that module does not support Voice
Here is one choice;
VIC2-2BRI-NT/TE
http://www.cisco.com/en/US/prod/collateral/modules/ps5365/product_data_sheet0900aecd801c595e.html
Cheers!
Rob
12-03-2010 08:45 AM
May I make a comment and please don't get offended by it.
Do you use a reputable consultant, or certified Cisco partner when designing and implementing your network?
Because your issue is of the type that happens when one doesn't.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide