12-18-2016 05:48 AM - edited 03-17-2019 08:59 AM
what is the steps I should follow to make the phone registered to CME router version 10.0 using IOS 15.4
voice register dn 2
number 3000
name Jaber-Android
voice register pool 2
registration-timer max 720 min 660
id mac 1C99.4C71.9184
session-transport tcp
type Jabber-Android
number 1 dn 2
dtmf-relay rtp-nte
username test password test123
codec g711ulaw
this is what I did on router.
12-18-2016 09:33 PM
Hi,
Jabber for Android is not supported with CME 10.0 as per the following
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme10spc.html
HTH
Manish
12-19-2016 12:12 AM
Hi Manish,
Thanks for help.
can you please tell what is configuration required on router to jabber for windows
also what version of jabber will be supported if i would use Windows 7 or 8 or 10
Also is Iphone supported if yes what version if mobile ios supported and what version of jabber for iphone.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: