Using a different port for Thirt Party SIP devices registration

[Mario Villalba Saracho]

can I use non standart SIP port for SIP client connections on CUCM ?

SIP profile tcp+udp 5060

and example i want make SIP profile TCP+UDP on 7777 port (for SIP phone reistrations)

I need to register third party SIP phone with non default port.

I had tried to change the port number in the Phone security profile, but the phone was not registering.

With port 5060 everithing works fine.

[Bill Mungaven]

Is there somewhere in the 3rd party device itself where you can manually set the port from 5060 to 7777? If you can set the port in the 3rd party device itself, I would think it should register. If there is no place in the device to manually set the port, then I would think you have to use the default port of 5060.

Bill

[Dennis Mink]

check call manager service parameters, you might be able to change it there, but I doubt that you can do it for clients only.

Please rate if useful