cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1163
Views
0
Helpful
4
Replies
Highlighted
Beginner

Using a pause in speed dial in CUCM user options

Using the web interface of CUCM user options to setup some frequently dialed conference bridges in my user options but it will not accept a comma or period.

Message dialog box pops up and tells me it allows only numeric, +, *, or #

How would I configure a conference number of 18665551212 with a pin of 123456#?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Master

Right, you will need to

Right, you will need to upgrade to get this feature :-)

Let us know if you need anything else on this topic, otherwise you may mark the thread as answered.

Chris

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Cisco Employee

What version is this?

What version is this?

HTH

java

if this helps, please rate
Highlighted
Hall of Fame Master

What version of CUCM you are

What version of CUCM you are running as this feature was added in version 9 I believe. I tested on 10.5 system and was able to build speed dial with number such as "555,,,,,1234"

Highlighted
Beginner

From the about line I get:

From the about line I get:
Cisco Unified CM User Options

System version: 8.5.1.14051-1

Wow.. had no idea we were that far behind..  Oh well.. I am just a lowly data engineer in a big corporation.. I have no voice for the voice side of things lol

Thanks guys

Highlighted
Hall of Fame Master

Right, you will need to

Right, you will need to upgrade to get this feature :-)

Let us know if you need anything else on this topic, otherwise you may mark the thread as answered.

Chris

View solution in original post