Hello,
I'm configuring AA for a customer and they have multiple FXO lines, so I did the following configuration, both ports can hear the AA message, but only port 0/0/0 can reach internal DNs.
voice-port 0/0/0
supervisory disconnect anytone
no battery-reversal
timeouts interdigit 5
timeouts call-disconnect 5
timeouts ringing 5
timeouts wait-release 5
connection plar opx 4999
impedance complex1
caller-id enable
!
voice-port 0/0/1
supervisory disconnect anytone
no battery-reversal
timeouts interdigit 5
timeouts call-disconnect 5
timeouts ringing 5
timeouts wait-release 5
connection plar opx 4999
caller-id enable
!
dial-peer voice 4999 voip
service aa
destination-pattern 4999
session target ipv4:10.0.10.254
incoming called-number 4999
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
dial-peer voice 33 pots
service aa
direct-inward-dial
port 0/0/0
dial-peer voice 34 pots
service aa
direct-inward-dial
port 0/0/1
Also attached logs for port 0/0/1
Thank you.
