12-05-2006 09:28 PM - edited 03-14-2019 07:05 PM
Hi,guys. I have a vg224 running mgcp with a ccm(4.1.3sr3). I have configured pickup groups in ccm, but I can not get the analog stations to access the pickup group assign to them. Is there a way or some config I can do on the vg224 to make this to work. Thanks bv
12-12-2006 12:42 PM
This can be done only when VG224 has SCCP Controlled Analog (FXS) Ports. With MGCP, the pickup groups will not work on VG224. http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a0080483a76.html
12-13-2006 10:46 AM
Hey sbilgi,
Thanks. I did revert to sccp ,not mgcp, and it worked. Thanks for the reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide