I have a VG224 configured using MGCP on callmanager 8.1. Port 1 on the VG224 is connected to a paging system. Caller dails the extension assigned to the VG224 port 1 to access the paging system.
Everything works fine but occasionally i have someone holds up the port so that everyone else dial that extension gets a busy signal. Is there a command that will show me the caller's extension that holds up the line?
I did a test and tried "show voice call status", it gives some kind of weird caller-ID which didnt much the test extension.
IntroductionThe IssueServices Shown their status as UnknownWhat actions require to be taken?Logs required for troubleshootingWhat to expect in the logs:
The purpose of this document is to provide troubleshooting insight into a well-known iss...
New Cisco Champion Radio release on Zero Trust for WebexListen: https://smarturl.it/CCRS8E14 Follow us: https://twitter.com/CiscoChampion Cisco introduced End to End (E2E) Encryption in 2008 as a Webex Meeting option where only the me...
Community Live- Tour of the Real-Time Monitoring Tool
(Live event - Tuesday, 20 April, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)
This event will have place on Tuesday 20th, April 2021 at 10:00 hrs PDT
Learn: How to configure Cloud Connected PSTN with Webex Calling
CCP Provider Name
Product Home Page Link
Webex Calling Region
Countries Supported by Provider
Free Trial Link
Contact Provider Link
FR & LU
Meet the Authors Video - Leveraging SBCs to Empower a Changing World of Collaboration
(Live event – Tuesday, 16th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Tuesday 16th, February 2020 at 10am PST ...