cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3309
Views
5
Helpful
1
Replies

VG224 IOS upgrade question

Brent Rockburn
Level 2
Level 2

How do I sprecify the IOS image I want it to boot from.

The current IOS is running out of slot0:

There is no "flash:" whenI do a show flash.

So I thought I could do

boot system slot0:vg224-i6k9s-mz.124-24.T6.bin

however when I do the below command this is what I get and there is no option for slot0:

xxx-x-0x(config)#boot system ?

  WORD   TFTP filename or URL

  flash  Boot from flash memory

  ftp    Boot from a server via ftp

  mop    Boot from a Decnet MOP server

  rcp    Boot from a server via rcp

  rom    Boot from rom

  tftp   Boot from a tftp server

Any help would be great.

1 Accepted Solution

Accepted Solutions

Chris Deren
Hall of Fame
Hall of Fame

I don't recall if the option shows up under help, but you definitely define it as slot, I though it needs to be slot0 though, i.e.

boot system slot0:vg224-i6s-mz.151-3.T2.bin

HTH,

Chris

View solution in original post

1 Reply 1

Chris Deren
Hall of Fame
Hall of Fame

I don't recall if the option shows up under help, but you definitely define it as slot, I though it needs to be slot0 though, i.e.

boot system slot0:vg224-i6s-mz.151-3.T2.bin

HTH,

Chris

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: