cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4883
Views
0
Helpful
4
Replies

VG224 not registered

Hello All,

i configured VG224 with CUCM 8.6 but it not registering and getting bellow error

ANALOGGW-01#u

001961: *Apr 11 15:32:20.359 EDT: SCCP(ANB7487A9E31405)send RegisterMessage, protocol_ver=0x11000102

001962: *Apr 11 15:32:20.359 EDT: SCCP(ANB7487A9E31405)send IpPortMessage

001963: *Apr 11 15:32:20.363 EDT: SCCP(ANB7487A9E31405)rcvd RegisterRejectMessage

001964: *Apr 11 15:32:20.363 EDT: SCCP(ANB7487A9E31405)rcvd register rej reason: Security Error

my configration shows below

VG224 GW:

!

stcapp ccm-group 1

stcapp

!

!

voice-port 2/0

timeouts ringing infinity

!

sccp local FastEthernet0/1.920

sccp ccm 10.62.124.31 identifier 3 version 7.0

sccp ccm 10.63.124.52 identifier 2 version 7.0

sccp ccm 10.61.8.41 identifier 1 version 7.0

sccp

!

sccp ccm group 1

bind interface FastEthernet0/1.920

associate ccm 1 priority 1

associate ccm 2 priority 2

associate ccm 3 priority 3

switchback method graceful

!        

!        

dial-peer voice 600 pots

service stcapp

port 2/0

!

ANALOGGW-01#sh sccp

SCCP Admin State: UP

Gateway Local Interface: FastEthernet0/1.920

        IPv4 Address: 10.61.8.13

        Port Number: 2000

IP Precedence: 5

User Masked Codec list: None

Call Manager: 10.62.124.31, Port Number: 2000

                Priority: N/A, Version: 7.0, Identifier: 3

                Trustpoint: N/A

Call Manager: 10.63.124.52, Port Number: 2000

                Priority: N/A, Version: 7.0, Identifier: 2

                Trustpoint: N/A

Call Manager: 10.61.8.41, Port Number: 2000

                Priority: N/A, Version: 7.0, Identifier: 1

                Trustpoint: N/A

Alg_Phone Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED

Active Call Manager: 10.61.8.41, Port Number: 2000

TCP Link Status: NOT_CONNECTED, Device Name: ANB7487A9E31400

Reported Max Streams: 1, Reported Max OOS Streams: 0

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Supported Codec: g711ulaw, Maximum Packetization Period: 20

Supported Codec: g711alaw, Maximum Packetization Period: 20

Supported Codec: g729r8, Maximum Packetization Period: 220

Supported Codec: g729ar8, Maximum Packetization Period: 220

Supported Codec: g729br8, Maximum Packetization Period: 220

Supported Codec: g729r8, Maximum Packetization Period: 220

Supported Codec: ilbc, Maximum Packetization Period: 120

4 Replies 4

Leonardo Santana
Spotlight
Spotlight

How is configured on CUCM? Can you post an screenshoot!

Did you configure the last 10 digits of the Mac Address of you interface?

Regards

Leonardo Santana

Regards
Leonardo Santana

*** Rate All Helpful Responses***

sorry i forgot to add in this post

yes i configured as gateway as SCCP with last 10 digit of VG224 mac. i did same configuration that working with other cucm cluster

can you post the this commands outputs:

show stcapp device summary

sh sccp all

Regards
Leonardo Santana

*** Rate All Helpful Responses***

See attached file