cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2806
Views
5
Helpful
6
Replies

VG224, VG248 and CUCM 11.5

dmcgary
Level 1
Level 1

Does anyone know if a VG224 or VG248 will "work" with CUCM 11.5?

1 Accepted Solution

Accepted Solutions

Hello dmcgary,

 

According to CUCM compatibility Matrix in here: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/Compatibility/CSR-Compatibility-Matrix-InteractiveHTML.html

 

Yes VG224 should work, with software version 15.1(4)M10 and VG248 should work with software version 1.3(2).

 

Best Regards, Jaime.

Please rate if you find this answer helpful.

 

View solution in original post

6 Replies 6

Hello dmcgary,

 

According to CUCM compatibility Matrix in here: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/Compatibility/CSR-Compatibility-Matrix-InteractiveHTML.html

 

Yes VG224 should work, with software version 15.1(4)M10 and VG248 should work with software version 1.3(2).

 

Best Regards, Jaime.

Please rate if you find this answer helpful.

 

Thank you for your quick response!

Hi, 

What if im planning to use SIP VG224 ?? could i still use them with BE7000M(M5)A ??? Also i attached copy of VGs Confiuration if needed

Thanks

As you question is off topic of the OP I’d recommend you to post your question in your own post.



Response Signature


R0g22
Cisco Employee
Cisco Employee
Why not move to VG-3XX ? VG-224 is still fine but VG-248 is extinct. :)

We have many of these, and have been slowly moving to VG310 and ATA190's. We will do this over several years, as budgets are tight.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: