cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
953
Views
5
Helpful
2
Replies

VG300 series network redundancy

Ted S
Level 1
Level 1

Hi,

 

We have a couple VG310 and VG320 devices and I was wondering if it is possible to have network redundancy.

 

We have a VG320 connected to one switch and I would like to use the other Ethernet port and connect it to another switch.

 

Is network redundancy possible? and if so, how can we achieve this.

 

Thanks in advance!

Ted

1 Accepted Solution

Accepted Solutions

Andrew Skelly
Level 7
Level 7

Here is a good document that offers two different options and full details on how to configure.  Hope this helps.

 

https://www.cisco.com/c/dam/en/us/td/docs/routers/access/vg224/software/configuration/guide/Cisco_Analog_Gateways_Network_Survivability_Deployment_Options.pdf

Please rate helpful posts by clicking the thumbs up!

View solution in original post

2 Replies 2

Andrew Skelly
Level 7
Level 7

Here is a good document that offers two different options and full details on how to configure.  Hope this helps.

 

https://www.cisco.com/c/dam/en/us/td/docs/routers/access/vg224/software/configuration/guide/Cisco_Analog_Gateways_Network_Survivability_Deployment_Options.pdf

Please rate helpful posts by clicking the thumbs up!

Great find! Thanks!

 

I went with the BVI method and is working as expected!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: