cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
244
Views
5
Helpful
2
Replies
Highlighted
Beginner

VG300 series network redundancy

Hi,

 

We have a couple VG310 and VG320 devices and I was wondering if it is possible to have network redundancy.

 

We have a VG320 connected to one switch and I would like to use the other Ethernet port and connect it to another switch.

 

Is network redundancy possible? and if so, how can we achieve this.

 

Thanks in advance!

Ted

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Rising star

Re: VG300 series network redundancy

Here is a good document that offers two different options and full details on how to configure.  Hope this helps.

 

https://www.cisco.com/c/dam/en/us/td/docs/routers/access/vg224/software/configuration/guide/Cisco_Analog_Gateways_Network_Survivability_Deployment_Options.pdf

Please rate helpful posts by clicking the Chuck Taylor logo!

View solution in original post

2 REPLIES 2
Highlighted
Rising star

Re: VG300 series network redundancy

Here is a good document that offers two different options and full details on how to configure.  Hope this helps.

 

https://www.cisco.com/c/dam/en/us/td/docs/routers/access/vg224/software/configuration/guide/Cisco_Analog_Gateways_Network_Survivability_Deployment_Options.pdf

Please rate helpful posts by clicking the Chuck Taylor logo!

View solution in original post

Highlighted
Beginner

Re: VG300 series network redundancy

Great find! Thanks!

 

I went with the BVI method and is working as expected!