cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1054
Views
0
Helpful
2
Replies

VG310 & VG320 CUCM versions

tomrayjr
Level 1
Level 1

We currently run System version: 8.6.2.20000-2 Unrestricted. I see where a minimum of 9.2xxx is required to utilize VG310 & 320 Gateways. We are upgrading to a version 10.x, but not 10.5. Is 10.5 required to support these devices OR can one of the earlier 10.x releases support them? I have seen at least one document that says 10.5 is required.

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

You only require 9.1(2)SU2 or later as the minimum, you can go higher if you want, if you're going to 10.x, I strongly suggest 105(2)

HTH

java

if this helps, please rate

View solution in original post

2 Replies 2

Jaime Valencia
Cisco Employee
Cisco Employee

You only require 9.1(2)SU2 or later as the minimum, you can go higher if you want, if you're going to 10.x, I strongly suggest 105(2)

HTH

java

if this helps, please rate

That's likely what we'll do. Hopefully, the upgrade path from 8.6 isn't too bad.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: