VIC2 compatibility

[federico_tv]

Could anybody please confirm me if BRI cards :

VIC2-2BRI- NT/TE 

are compatible with old 1751V and 1760 routers ??

Is there any particular Voice IOS they are compatible starting from ??

Thank you very much.

[Rob Huffman]

Hi Federico;

Check;

Platform Support

Cisco IOS Support 1	1751, 17603	2600	2600XM/2650XM	36204, 3640 2	3660 2	2691, 3725, 3745	VG200
VIC-2BRI-S/T-TE 2-Port ISDN BRI VIC, S/T interface, TE	Not Supported	12.0(2)XD, 12.0(3)T, 12.0XK, 12.1(1), 12.1(1)T, 12.2(1), 12.2(2)T,12.2(2)XT, 12.2(11)YT, 12.3(1)	All Cisco IOS Software Versions		12.0(7)XK, 12.1(1)T, 12.1(5)YB, 12.1(5)YD, 12.2(1), 12.2(2)T, 12.2(2)XT, 12.2(11)YT, 12.2(15)ZJ, 12.3(1), 12.3(2)T	All Versions	All Cisco IOS Software Versions
VIC-2BRI-NT-TE 2-Port ISDN BRI VIC, S/T interface, NT, TE	All Versions	12.1(3)XI, 12.1(5)T,12.1(5)YB, 12.1(5)YD, 12.2(1), 12.2(2)T, 12.2(2)XT, 12.2(11)YT, 12.3(1)	12.2(8)T1,12.2(11)T, 12.2(11)YT, 12.2(12), 12.2(15)ZJ, 12.3(1), 12.3(2)T	12.1(3)XI, 12.1(5)T, 12.1(5)YB, 12.1(5)YD, 12.2(1), 12.2(2)T, 12.2(2)XT, 12.2(11)YT, 12.2(15)ZJ, 12.3(1)	12.1(3)XI, 12.1(5)T, 12.1(5)YB, 12.1(5)YD, 12.2(1), 12.2(2)T, 12.2(2)XT, 12.2(11)YT, 12.2(15)ZJ, 12.3(1)	12.2(11)YT, 12.2(13)T, 12.2(15)ZJ, 12.3(1), 12.3(2)T, 12.3(4)XD	12.1(5)T, 12.2(1), 12.2(2)T, 12.3(1)
VIC2-2BRI-NT-TE 2-Port ISDN BRI VIC, S/T interface, NT, TE	12.2(15)ZL, 12.3(2)XA, 12.3(2)XC, 12.3(2)XE, 12.3(4)T, 12.3(5)	Not Supported	12.2(15)ZJ, 12.3(4)T	12.2(15)ZJ, 12.3(4)T (Not supported for Cisco 3620.4)	12.2(15)ZJ, 12.3(4)T	12.2(15)ZJ, 12.3(4)T, 12.3(4)XD	Not Supported

¹ Voice requires a Cisco IOS Software Voice feature set on the 1700 series router, and a Cisco IOS Software Plus feature set on the 2600/3600 series router.

² Voice is not supported on the 3631 router.

³Cisco 1750 router platforms do not support the BRI VICs.

⁴Cisco 3620 series routers do not support the VIC2-2BRI-NT-TE cards.

From;

http://www.cisco.com/c/en/us/support/docs/voice/digital-ccs/7960-2isdn-bri-vic.html

Cheers!

Rob

[Aman Soi]

Hi Federico,

[+5] to Rob. 

you can also refer the links

http://www.cisco.com/c/en/us/support/docs/voice/digital-ccs/15415-bri-voice-port-cfg.html

http://www.cisco.com/c/en/us/support/docs/voice/digital-ccs/7960-2isdn-bri-vic.html

regds,

aman

[federico_tv]

Very satisfactory infos, 

Thank you both !!

A last question :

How do I calculate the amount of PVDM needed per VIC card ??

I have to install 2x    vic(2) 2 BRI  cards, which PVDM I need ?

[Aman Soi]

Hi,

You can us e DSP Calculator

http://www.cisco.com/web/applicat/dsprecal/dsp_calc.html

regds,

aman

[daniel.facey@telent.com]

Hi,

FYI I have a customer who runs these cards in 2901s using ios 15.4(3)M5 which is not listed in the Cisco compatiblity guidelines but still works.