cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

144
Views
0
Helpful
3
Replies
Beginner

Visibility of Dynamic Hunt Groups

Hi All,

I'm obviously aware of the use of dynamic huntgroups; is there any method of knowing how many endpoints happen to be in or out of the linegroup at any moment in time?

Cheers,

Stu

3 REPLIES 3
Cisco Employee

Re: Visibility of Dynamic Hunt Groups

Hi!

You can use the show ephone-hunt command to display current hunt group members, including those who joined the group dynamically. Please refer to:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_e1ht.html#wp1024368

Hope this helps! If it does, please rate :)

Teresa.

Regards, Tere. If you find this post helpful, please rate! :)
Highlighted
Beginner

Re: Visibility of Dynamic Hunt Groups

Hi Teresa,

Sorry, I should have said this is a CUCM solution and not 'Express'

Cheers,

Stu

Cisco Employee

Re: Visibility of Dynamic Hunt Groups

Hi Stu,

Unfortunately this feature is only available for CME. Please refer to:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeroad.html

Regards,

Teresa.

Regards, Tere. If you find this post helpful, please rate! :)
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here