cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
458
Views
0
Helpful
1
Replies

VM Ports are not getting register !!

anis_cisco
Level 1
Level 1

Hi all,

I have CUCM B.E 6.1 ...

Im integrating Unity Connection with CUCM but Voicemail ports are not getting registered with CUCM

The Device Name of VoiceMail Port at CUCM is CiscoUM1-VI1 and the device name prefix in unity connection at port group is CiscoUM1-VI and the display name of port in Unity Connection is CiscoUM1-VI-001 ...

I checked the troubleshooting guide & it mentioned to check the security mode setting !!! I checked & Security mode in CUCM & Unity Connection is Non-Security !!!

can any body suggest ASAP what could be the reason ??

Regards,

1 Reply 1

Justin Brenton
Level 4
Level 4

Hi Anis,

 

Your unity connection port group name should be CiscoUM1.

 

 

You also need to  create a hunt list, hunt pilot number, and line group for voicemail and assign the CiscoUM1 group.  You then need to ensure your voicemail ports/extension are assigned to the Line Group.

 

Your line group name in CUCM should be "CiscoUM1", Ports names in CUCM should be i.e

CiscoUM1-VI1, CiscoUM1-VI2, CiscoUM1-VI3, etc

 

CUCM Setup:

 

 

 

Unity Connection Setup:

 

 

 

 

 

 

HTH, Please rate helpful posts

 

Regards,

Justin

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: