cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

401
Views
5
Helpful
18
Replies
Highlighted
Beginner

Re: voice hunt-group issue on a 2911.

OK i just wanted to make sure i was following the correct config.  I thought if there is a better way to do this then i am open to that.

Thanks for the reply.

Advisor

voice hunt-group issue on a 2911.

Keith,

Is the "AA" a service you have running in CME (i.e. BACD) or is it the attendant application running in CUE? Or something else altogether.  Islam is hunting the the BACD angle here. Your original dial-p suggested you may have AA enabled in CUE (or similar).

To dig deeper, we'll need output from:

show run | s application

show run | s ephone-dn

sh run | s telephony-s

sh run | s dial-peer

If you are trying to use CUE for the AA then we'll need you to session into CUE and provide the output of "show run"

-Bill (@ucguerrilla)

HTH -Bill (b) http://ucguerrilla.com (t) @ucguerrilla

Please remember to rate helpful responses and identify

Beginner

Re: voice hunt-group issue on a 2911.

Thanks for all who replied.  This problem has been fixed.

Hunt-Group bug!!

I was using a hunt-group of 100.

voice hunt-group 100 parallel

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtn99445

VIP Mentor

voice hunt-group issue on a 2911.

Thanks Keith for updating us. That really was a nasty one..I looked online to see what the issue could be but didnt find anything..Nice work..(+5)

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here