cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
132
Views
0
Helpful
3
Replies

Voice System Help

ma7moud.geek1
Level 1
Level 1

This my first time to implement a cisco voice system to a client, The requirements are:

1-Support (32) Extension.

2- Support (6) Cisco 7937G IP Conference Station (or any suggestions for alternative models)

3- (32) cisco IP Phone SPA525G (or any suggestions for alternative models)

I am not sure which router should i chose 

1-(CISCO2811-K9,PVDM-64,VIC2-4FXO)

2-(CISCO2911V/K9,VIC2-4FXO)

3- Any recommendation but Please take (cost & stability into consideration)

Thanks in advance.

3 Replies 3

Manish Gogna
Cisco Employee
Cisco Employee

Hi,

Please check the following link for supported endpoints, platforms and IOS/firmware recommendations on CME 11.5

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme115spc.html

For configuring CME you can refer the CME admin guide

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm.html

HTH

Manish

Chris Deren
Hall of Fame
Hall of Fame

Alos, I would take a look at new offering BE4000, which is improvement to dated BE6000S:

http://www.cisco.com/c/en/us/products/unified-communications/business-edition-4000/index.html

Jaime Valencia
Cisco Employee
Cisco Employee

Aside from the recommendations, I would STRONGLY suggest you reach out to a Cisco partner for this, so you can explain them in detail all that you want from the system, and they can propose the right solution, what redundancy you need, and what's your budget.

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: