Voice translation rule to redirect single number

[jpodplesky]

I have cme 7.1 with exchange unified messaging. On the voice port I have the connection plar set to the pilot number of the UM auto attendant .  I would like to create a translation rule on incoming caller id  (my cell phone) that would redirect that single incoming number to an ephone-dn. Goal is so if any incoming caller ID except my cell number goes to the auto attendant, my cell number would be redirected to the ephone-dn 

Any help appreciated       

[Ayodeji Okanlawon]

Jack,

You cant natively route a call to another extensiuon based on the calling number..You may be able to use a tcl script, but thats another level of skill entirely

Please rate all useful posts

"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

[Arun Thomas]

Jack,

Do you have callerID for the calls coming in via FXO port ?

If yes, may be you can try a DP with answer-address

dial-peer voice 1 voip 
 translation-profile incoming Cell
 answer-address 

voice translation-rule 2 
 rule 1 /^(pilotnumber)$/ /(ephone dn)/ 

voice translation-profile Cell

 translate called 2