Voicemail license for CME 2951

[abhisar patil]

Dear All,

I have Cisco CME 2951 and want to have voicemail for users. So how to check whether I have licenses for voicemail or how I can order the same.

Let me know if config needed.

Thank You,

Abhisar.

[luirami2]

Abhisar,

Do you have a CUE module?

The CME 2951 router can't do voicemail by itself, you need to have a CUE module for that to work.

In other words licenses will not be neded on CME, noly on CUE and depends on the CUE version you have.

~ Luis Ramirez,

[abhisar patil]

Dear Luis,

Thank you for your reply.

Regarding module, I dont  have idea, but I have attached show tech from the CME router, request if  you can check and let me know the information about the module and  voicemail license as I am not much aware about VOIP.

Thank You,

Abhisar.

[luirami2]

Abhisar,

You do have a CUE module on the router.

SM-SRE-710-K9 on Slot 1.

interface SM1/0

ip unnumbered GigabitEthernet0/0.2

service-module ip address 10.1.1.2 255.255.255.0

!Application: CUE Running on SM

service-module ip default-gateway 10.1.1.1

Can you access thw IP address 10.1.1.2 through webpage?

Or perhaps use the following command to console the CUE?

service-module SM1/0 session

~Luis Ramirez,