Want to add a new voice card

divine007 · ‎11-25-2013

My cisco 2800 series has a voice E1 card of xtics

PVDM Slot 0:

16-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

Hardware Revision : 4.0

Part Number : 73-8538-05

Board Revision : B0

Deviation Number : 0

Fab Version : 04

PCB Serial Number : FOC114530JX

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 00

Product (FRU) Number : PVDM2-16

Version Identifier : V01

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 03 EF 41 04 00 82 49 21 5A 05 42 42 30

0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 31 34 35

0x20: 33 30 4A 58 03 00 81 00 00 00 00 04 00 09 00 CB

0x30: 88 50 56 44 4D 32 2D 31 36 89 56 30 31 20 D9 02

0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Now i want to get a 32 channel voice card.

How can i get it an its compatibilities!

gregorygout · ‎11-25-2013

Hi Divine,

2800 series do not support PVDM 3:

PVDM3 modules are not supported on the existing Cisco 2800 and 3800 Series Integrated Services Routers.

You need to check with your version of 2800 (11,21,51 ?) how many PVDM2 it can takes.

Cheers,

Greg

gregorygout · ‎11-25-2013

You will be fine on any 2800 serie with 1 PVDM2-16 and 1 PVDM2-32

Aman Soi · ‎11-25-2013

Hi Ambe,

Refer the link for voice cards support on ISR routers.

regds,

aman