We have been deploying the Cisco Smart Business Communications System, and have also previously deployed the Linksys One solution. We are interested in deploying the Cisco Unified CME on ISR, Cisco Unified SRST, and Cisco Unified CMBE solutions in addition to the SBCS solution.
What components are needed to deploy the Cisco Unified CMBE solution? We usually connect the customer to the PSTN through a SIP gateway, and we usually do not need to terminate any voice T-1s. We will use broadband that is faster than T-1 or bonded T-1 (such as Verizon FiOS) if it is available, but we are not always able to get affordable broadband with upload speeds faster than ADSL or T-1. We might still need to terminate FXO trunks for backup in case an Internet connection is down. We use SIP providers that support G.711 mu-law, G.711 A-law, and G.729, and need to be able to handle calls that use any of these codecs. We also want to be able to transcode, conference, monitor, and record phone calls.
What certifications or specializations do we need to obtain in order to sell the Cisco Unified CMBE solution?
This document is intended to receive any new ideas for TAC to create new useful walkthrough videos to help set up deployments, integrations, etc.
Feel free to share any feedback about new walkthrough videos you consider useful, please share your o...
Configuring Cloud Connected PSTN (CCP) – Easy as 1-2-3!
STEP 1: PREPARE
Before you can configure your CCP in Control Hub, you must procure PSTN services from an authorized Webex Calling CCP Partn...
To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about how to read Cisco Unified Communications trace files. In this session, Cisco D...