What is the IOS command to show the analog\pots ports in my VG350?

[kbeaton]

I have a third party software I can dig and find this information, but was hoping I could run a command that would show me all the ports in the system and the associated extensions.

These are the two pieces of information I'm looking for, port and extension

AALN/S4/SU0/0@S200-R2-VG350-1.ahs.local - 6699

AALN/S2/SU0/1@S200-R2-VG350-1.ahs.local - 6121

AALN/S2/SU0/2@S200-R2-VG350-1.ahs.local - 4143

AALN/S2/SU0/3@S200-R2-VG350-1.ahs.local - 6106

AALN/S2/SU0/4@S200-R2-VG350-1.ahs.local - 6627

I ran show config, but it didn't seem to include this information.

The reason I say that is because after I ran the command and copy pasted the results into notepad, I searched for 6699 and it couldn't be found...

Thanks in advance for the help!

Kelvin

[Maren Mahoney]

Try:  show dial-peer voice summary

Maren

[Jaime Valencia]

What protocol are you using for those ports?