06-09-2010 11:03 PM - edited 03-15-2019 11:10 PM
what version of callmanager support cisco ipphone 7910?
Solved! Go to Solution.
06-09-2010 11:20 PM
The 7910 is supported as early as 4x. See this doc for the firmware version defaults for each version: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.pdf
Hailey
Please rate helpful posts!
06-10-2010 05:25 AM
Hi there,
Just to add a note to the good tips from Hailey (+5 Hailey)
The 7910 goes way back to CCM 3.1, it's truly one of the
"old timers" It has been EoL for some time now
Be aware that the end-of-sale date for the Cisco Unified IP Phone 7910G was July 28, 2004, and for the
7910G+SW, it was January 15, 2006.
Find additional information at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
Cheers!
Rob
Please support CSC Helps Haiti
06-09-2010 11:20 PM
The 7910 is supported as early as 4x. See this doc for the firmware version defaults for each version: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.pdf
Hailey
Please rate helpful posts!
06-10-2010 05:25 AM
Hi there,
Just to add a note to the good tips from Hailey (+5 Hailey)
The 7910 goes way back to CCM 3.1, it's truly one of the
"old timers" It has been EoL for some time now
Be aware that the end-of-sale date for the Cisco Unified IP Phone 7910G was July 28, 2004, and for the
7910G+SW, it was January 15, 2006.
Find additional information at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
Cheers!
Rob
Please support CSC Helps Haiti
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide