whitch license do I need ?

[florentgoue]

Hi
I need some advice about licensing.
we have acquired:
- 10 telephone ip CP8845
- 1 ISR 4321 / K9 router with ISDN BRI card
What we want to do:
- Use these these phones with CME (voice and video calls)
- Connect to ITSP for outside calls

what do I need as license?

########################################################################################################

ROUTER#show license all
Smart Licensing Status
======================

Smart Licensing is ENABLED

Registration:
Status: UNREGISTERED
Export-Controlled Functionality: NOT ALLOWED

License Authorization:
Status: EVAL MODE
Evaluation Period Remaining: 87 days, 15 hours, 12 minutes, 18 seconds

License Conversion:
Automatic Conversion Enabled: False
Status: Not started

Export Authorization Key:
Features Authorized:
<none>

Utility:
Status: DISABLED

Data Privacy:
Sending Hostname: yes
Callhome hostname privacy: DISABLED
Smart Licensing hostname privacy: DISABLED
Version privacy: DISABLED

Transport:
Type: Callhome

License Usage
==============

(ISR_4321_UnifiedCommunication):
Description:
Count: 1
Version: 1.0
Status: EVAL MODE
Export status: NOT RESTRICTED

(CUBE_T_STD):
Description:
Count: 10
Version: 1.0
Status: EVAL MODE
Export status: NOT RESTRICTED

(CME_EP):
Description:
Count: 10
Version: 1.0
Status: EVAL MODE
Export status: NOT RESTRICTED

Product Information
===================
UDI: PID:ISR4321/K9,SN:FDO22222MWX

Agent Version
=============
Smart Agent for Licensing: 4.6.7_rel/98
Component Versions: SA:(1_3_dev)1.0.15, SI:(dev22)1.2.1, CH:(rel5)1.0.3, PK:(dev18)1.0.3

Reservation Info
================
License reservation: DISABLED

##########################################################################""
ROUTER#show license summary
Smart Licensing is ENABLED

Registration:
Status: UNREGISTERED
Export-Controlled Functionality: NOT ALLOWED

License Authorization:
Status: EVAL MODE
Evaluation Period Remaining: 87 days, 15 hours, 10 minutes, 25 seconds

License Usage:
License Entitlement tag Count Status
-----------------------------------------------------------------------------
(ISR_4321_UnifiedCommun...) 1 EVAL MODE
(CUBE_T_STD) 10 EVAL MODE
(CME_EP) 10 EVAL MODE

[Jaime Valencia]

If you're a customer, you should be discussing this with the Cisco partner (or distributor) from whom you bought this.

If you're either a Cisco partner or distributor, you should be reaching out to pre-sales for assistance with licensing and ordering.

[HARIS_HUSSAIN · Accepted solution]

Contact your Local Cisco Partner for the same.
You would need the
1) UCK9 Or Unified communication License to enable Voice Features on IOS and
2) in addition, you would need 10 CME_EP Licenses for 10 IP Phones.
3) You would need CUBE_T_STD for ITSP Cube sessions. Quantity for this depends on a number of CUEB Session you required.

*** Please rate helpful post; Mark "Accept as a Solution" if applicable

Thanks,
Haris

[florentgoue]

Hi Haris
Thx for your reply.
1- For the sip trunk, our privider give us one sip trunk and 4 concurent calls.
2- Can I use the same CUBE_T_STD licence with ISDN bri connexion ??

[HARIS_HUSSAIN · Accepted solution]

2- Can I use the same CUBE_T_STD license with ISDN Bri connexion ??
===> CUBE License is required for IP to IP calls for IP to PSTN Call on ISDN Bri you don't need any lines. only UCK9 Package should be enough.

*** Please rate helpful post; Mark "Accept as a Solution" if applicable

Thanks,
Haris