10-27-2016 01:19 AM - edited 03-17-2019 08:29 AM
Hi,
I have a question about Windows 10 TAPI support. It is not clear to me if for example Windows 10 TAPI is supported with CUCM 10.5
On document says yes with a 10.5.2 upgrade:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuw55248/?referring_site=bugquickviewredir
Another document from Devnet says no:
https://developer.cisco.com/site/tapi/documents/supported-windows-os/#
I have a customer with 10.5, and before I do an upgrade to 10.5(2.13900.12) or 10.5(2.14067.1) I would like to know if TAPI driver is working with Windows 10
Thanks
JH
10-27-2016 01:33 AM
Hi,
Yes as per the link below TAPI will work with Windows 10 after upgrading to one of the fixed versions.
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuw55248/?referring_site=bugquickviewredir
Aseem
(Please rate if useful)
10-27-2016 01:38 AM
Hi Aseem,
Thanks for the quick response. I just wanted to be sure
Bye
Jan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: