I am in the process of integrating the Xmedius fax server and cannot seem to get the server to communicate with the call manager. We are running CCM 4.2.3 and i have followe the Xmedius install guide. The Xmedius installer technicians cant figure it out either. The fax server wont send a fax or answer an inbound fax call. We have configured it as MGCP and the fax server is setup in call manager as an H.323 gateway. Any assistance would be greatly apreciated.
i got the following config working before but it's for h323
dial-peer voice 301 voip
description FAX Dial-Peer
session target ipv4:10.205.x.x
fax rate 14400
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
you might want to try it out