7206 vxr g2 bgp ipv6 address-family creation problem
I have a cisco 7206 vxr on the bgp connection. I can try to on the bgp create address-family ipv6 unicast but i see error % BGP: Error initializing topology. I'm using ios version c7200p-spservicesk9-mz.122-33.SRD2.bin
My configrations are below:
ip address 10.230.238.133 255.255.255.252
router bgp 65536
neighbor 10.230.238.134 remote-as 100
neighbor 10.230.238.134 description ***
neighbor 10.230.238.134 update-source Loopback3
network 172.17.0.0 mask 255.255.255.0
neighbor 10.230.238.134 activate
neighbor 10.230.238.134 default-originate
neighbor 10.230.238.134 distribute-list 22 out
neighbor 10.230.238.134 route-map in in
neighbor 10.230.238.134 route-map Out out
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Cisco Digital Network Architecture Center Modules (Design Module)Part.3In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module.Cisco DNA Center gives us the flexibility and scalability to configure mult...
Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ...
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...