Which IPv6 address range is suitable for anycast addresses for distributed services such as DHCP or DNS?2001:db8:0234:ca3e::1/1282002:db84:3f30:ca84:be76:2/64The first one isn't a range. but people are saying that the second one is invalid. But why?
I configured the simple network below to test the connectivity of the ipv6 in the devices. The configurations are as shown and ipv6 unicast-routing is enabled. When pinging from Router 5 to Router 6 G0/1, it succeeds but when pinging from Router 5 to...
Hi, members!
1. I met the following sentence. Is it true or false ?
" Only one IPv6 link local unicast address is possible per interface "
2. Can some Cisco devices have the secondary IPv6 link local address on an interface ?
I already read the...
Hey guys I'm a college student studying CCNA. I'm having troubles being able to ping any and all of my ipv6 addresses on router 2 from all end devices. I can ping all of router 1's ipv6 addresses from all end devices but not router 2. I have linked m...
My router is able to ping the internet via IPV6exulanit-router#ping 2606:4700:4700::1111Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 2606:4700:4700::1111, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/...
Greetings to the esteemed community here,I am having very strange problems with implementing dual-stack topology in my Packet Tracer excercise which I have attached here.The first problem consists of unstable routing using OSPF on IPV6, which manifes...
Hi everybody, I have been trying to configure router using ipv6 via CLI. Despite my input matching one suggested in the official documentation, CLI has marked all the inputs as invalid. I am using Cisco Packet Tracer 8.2.1Here are examples of my inpu...
Greetings.I have a simple set up consisting of a Cisco 4321 router, 2960 switch, and a Windows 11 host.The router is running IOS XE 16.6.4 and the switch is IOS 15.5(2).The router and switch are configured for IPv6, and the host (eventually) gets an ...
I am a Phd Researcher at Lancaster university researching the security of the UK Internet infrastructure.
I need to add support for a proposed experimental IPv6 Hop By Hop Extension Header to a routers Kernel to test my theories. I am more a server...
Hello, trying to configure PIMv6 using SSM.I enabled IPv6 multicast routing globallyOn the interface I configured:ipv6 mld join-group ff36::1 include source-list MULTICAST_SOURCEand it says %Error: MLD acl: MULTICAST_SOURCE Ranges are not accepted: 2...
I am in the process of building a SD Access Lab. My Fusion routers are Cisco Catalyst 3750X's running the latest IOS 15.2(4)E10 with IP Services Licenses and the dual IPv4, IPv6 SDM template (sdm prefer dual-ipv4-and-ipv6 default).We currently have ...
Hello there,I´ve got a c896VAG LTE router and I can´t get the internet connection ipv6 up and running. As far as I´m concerned there seems to be no link from interface Vlan over the ipv6 dhcp pool to interface cellular. I´m able to ping clients from ...
Compliments,I built a network with both IPv4/IPv6 the Multi switch is configured as the layer 3 router and the (Router) is the external network site. All pings are working except the Router to Multi switch IPv6 ping the two interfaces have the same l...