IPv6

Hello,We have a 3750 and trying to add a /48 to ip route, it accepts the command but it does not work or work as a gateway, it does work as a /64 though.We are running the following12.2(55)SE12 C3750-IPSERVICESK9-MIs there anything i can do to make i...

hello ,i have posted other Question about this problem and i did not get a helpfull answer. i try to bild pppoe server on cisco 1941, my problem is that ipv6 always excedded the traffic limit when i limit the pppoe sessionno matter wich method i used...

Hey all,I'm possibly looking for a Cisco router that is a) capable of IPv6 addressing internally and b) suitable for a SOHO environment.Having gigabit speeds isn't essential as I'll be using some kit that can only handle Fast Ethernet anyway.Nothing ...

I've been trying to acquire an ipv6 prefix from a Netgear LB1120 (LTE Modem) in bridge mode. When connected to the 3945E I have no success with any delegation techniques. When connected directly to a switch in the lan or  to a computer I manage to ac...

I encountered a problem when using ZABBIX to monitor IPv6 traffic. The details are as follows:1. IPv4 address and IPv6 address are configured on the interface.2. Use ZABBIX monitoring equipment3. IPv4 use oid: 1.3.6.1.2.1.31.1.1.1.6 And 1.3.6.1.2.1.3...

I'm trying to make something work with a Cisco ASA 5510 and am a bit lost on how and/or where to start. To make a long story short, we've got a server that publicly hosts a web application, and upper management has decided they want it to be addresse...

We're running a growing number of IPv6 only networks. We use cxd.cisco.com to upload large SR attachments (see https://www.cisco.com/c/en/us/support/web/tac/tac-customer-file-uploads.html) but this host is IPv4 only (173.37.151.76) Does Cisco provide...

Hi Team, What is the relevance of BIOS -> Advanced -> Network Stack Configuration -> IPv6 HTTP Support in UCS C220 M5 machines? Can we make use of this option for OS installation purposes? Thanks!

When I use a broadcast IP address, for example 198.255.255.255, what will happen when it gets passed down to the link-layer which will then look for the corresponding MAC address in your ARP table. Does your ARP table have an entry for 198.255.255.25...

Have IPv6 (Dynamic) from Comcast. I am able to get a /60 and need some help with what to do next.As you can see in the pic, I'm able to route IPv4 via the IP Services on the 3560. That's working well. Now I want to get IPv6 up and running.In the past...

Long and short is that I have a switch only network (not because I wanted it, but because I was given it as a cruel joke) there are three networks per switch, and three layer three interfaces. Vlan 400,450 and g1/0/24. Unicast works through. Now I am...

Hi Team,I am trying to use iPXE on a Cisco UCS C220-M5 machine. The machine uses the NIC model- UCS VIC 1457. Whatever I do I cannot get networking up using IPv6 from within iPXE.  I tried to use both SLAAC and Stateful DHCPv6 approach for obtaining ...

I’ve been studying for the CCNA primarily using the OCG books (Wendell Odom), and I am having difficulty understanding a paragraph about IPv6 routing.The OCG states that you cannot add a static route specifying only an outgoing interface, if that int...