I am trying to setup a lab for SD WAN, I am using vEdge qcow image available on Cisco's software store. I am aware one need smart account to for vEdge serial number but I have couple of queries around serial number and would appreciate if someone could sort it out:
1. qcow image , is a cEdge image ? Reason asked generate serial number on PnP portal one need to select base PID and two options are, VEDGE-CLOUD-DNA & CSR1KV. So for vEdge's qcow software what is the base PID ?
2. I do have s smart account which is tied to my employer's domain. So if go ahead and create serial number for my lab will it by any chance create an issue with employer
New Cisco Champion Radio release on Cisco Smart Building SolutionsListen: https://smarturl.it/CCRS8E16Follow us: https://twitter.com/CiscoChampion Now more than ever, sustainable and flexible building designs are at the forefront of every develo...
DRAFT -- THIS DOCUMENT IS STILL IN DRAFT FORM
MACsec is IEEE standard 802.1AE. It was developed by the IEEE to compliment the 802.1X-2004 standard. MACsec was developed to allow authorized systems to connect and then encrypt data that is transmitt...
Today I'm going to talk about SD-wan including SD-WAN advanced lab ,, first thing let's take a small brief about the SD_WAN. What is SD-WAN? SD-WAN is Software define wide area network and SD-WAN is key part of the technology o...
Leopold Fisher, Cisco Meraki IoT specialist, will introduce you to new and innovative additions to the Meraki portfolio coming in April 2021.
Meraki Vision Session
MV smart camera range is getting big...
Ask questions from Wednesday, April 14 to Tuesday, April 27, 2021.
To participate in this event, please use the button to ask your questions
Dynamic Routing Protocols & IPv6
Have any questions on dynamic routing protocols with IPv6?
In this eve...