The M3-PM-RTR3C (also referenced as M3-PM-RTR3CG) provides network routing support in the M3C4G system. It is based on Cisco® 5915 Embedded Services Router (5915 ESR) and Cisco ESS 2020 (ESS 2020) switch technology, offering enterprise-strength security. Four, of the Fast Ethernet ports (labeled SW PORTS PoE 4-7) are PoE injected, with a combined power, (on all four) of less than 50 W maximum, which follows the IEEE 802.3at PoE standard. This provides reliable operations under shock and vibration conditions typical for mobile applications. The M3-PM-RTR3C provides:
Streaming multicast video support
Remote voice services with Cisco Unified CME
Security to protect the network and transmitted data
The M3-PM-RTR3CG supports IPSec, SSL/TLS, SRTP, 3DES, AES, and IKE security protocols.
Hi all i am using JNC to manage device . Trying to delete specific node on basis of node value which is key to list .
I am trying to use markdelete(Str Path) to delete my node but node able to get correct path for my node with node-name value as getting p...
we have a we-c3560x-24p switch with version 12.2 (55) SE5 that was off our network for a few years and we connected it back up to the network but it shows that there are a few devices connected to it but there is only 1 SFP connected in the G1/1. An...
Hi Experts, We are making a rest call to NSO, as part of the reply, NSO will return a response similar to the below with a Etag value: HTTP/1.1 100 ContinueServer:Allow: GET, POST, OPTIONS, HEADContent-Length: 0HTTP/1.1 201 CreatedServer:Locatio...
Hi,I am unable to divert a call to some destination.I am giving this XML response to the CUCM <Response><Result><Decision>Permit</Decision><Obligations><Obligation FulfillOn="Permit" ObligationId="divert.simple">&l...