Created by: John Devavaram on 04-09-2012 10:04:27 PM Hello team, We are seeing the following error message on CIMC main page: Overall Server Status is reported as "Severe Fault". Fault Sensors display the following: Threshold Sensors Sensor Name Status Reading Units DDR3_P1_C0_ECC Non-Recoverable Error 253 error Please refer to the attached screen captures for details. Look forward to hearing from you. Thank you, John
Subject: RE: Overall Server Status is reported as "Severe Fault" Replied by: Brett Tiller on 05-09-2012 05:38:08 PM Hi John,
Thanks for the information. I've provided the following request for data and steps below.
1. In CIMC please click on the Inventory link, then the Memory tab and let us know the displayed values.
2. Please reload the server via the router cli 'ucse <slot>/0 reload' and let us know if the fault remains or disappears.
Subject: RE: Overall Server Status is reported as "Severe Fault" Replied by: Brett Tiller on 05-09-2012 05:55:49 PM Hi John,
Our Engineering team says that you can ignore this error message as it is incorrect. This incorrect message is fixed in a later release which we'll post soon.
Subject: Re: New Message from John Devavaram in Unified Computing System E-Series Se Replied by: Jin Zhang on 05-09-2012 05:38:38 PM John,
I believe this error was fixed by a later version of the BMC/CIMC image.
Daniel, can you confirm that?
Brett, what's the current version of image you have given to John, is it the 0607 one?
Subject: RE: Overall Server Status is reported as "Severe Fault" Replied by: John Devavaram on 06-09-2012 02:13:08 PM Brett, Jin and team, The reload of the module, momentarily stops the Severe Fault from appearing for a few hours (may be). But, the Severe Fault error does appear after some time even after reloading the module/ powering off the router and powering it back on. Currently, the UCS-E160D-M1/K9 module is running the following versions: CIMC Firmware: Running Version: 1.0(1.20120607153607) BIOS Version: 22.214.171.124
Glad to hear that it is fixed in most recent BMC/CIMC image.
Hi, I am trying to do system install NSO 126.96.36.199 on Redhat Server. It was an offline server. so I did installed java and ant rpms manually and installed NSO. I can do ssh to nso cli, but I can not see ports opening up for webui. I ha...
Hello, I am trying to send a 'show version' command to my Cisco ASA using Ansible, but I am encountering the following errors and I don't know why. The same thing works for my Cisco router though. Below are some details that might be helpful. Ci...
Hi, I want to run a jsonrpc command to get the live-status of device hostname. I'm trying the below command but couldn't get succeed. Can any one help me to fix this ? Assume i got logged in and get_trans method ran successfully before exec...
Hi all i am using JNC to manage device . Trying to delete specific node on basis of node value which is key to list .
I am trying to use markdelete(Str Path) to delete my node but node able to get correct path for my node with node-name value as getting p...