# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
iface lo inet loopback
iface eth0 inet dhcp
iface eth0 inet6 static
pre-up modprobe ipv6
show the routing Table:
CGR1000#show ipv6 route IPv6 Routing Table - default - 5 entries Codes: C - Connected, L - Local, S - Static, U - Per-user Static route B - BGP, R - RIP, I1 - ISIS L1, I2 - ISIS L2 IA - ISIS interarea, IS - ISIS summary, D - EIGRP, EX - EIGRP external ND - ND Default, NDp - ND Prefix, DCE - Destination, NDr - Redirect O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2 ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2, a - Application C 2001::/64 [0/0] via GigabitEthernet0/1, directly connected L 2001::1/128 [0/0] via GigabitEthernet0/1, receive C 3001::/64 [0/0] via GigabitEthernet2/1, directly connected L 3001::1/128 [0/0] via GigabitEthernet2/1, receive L FF00::/8 [0/0] via Null0, receive CGR1000#
root@qemux86:~# /sbin/route -6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2001::/64 :: U 256 0 1 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 2001::1 UG 1 0 0 eth0 ::/0 :: !n -1 1 50 lo ::1/128 :: Un 0 1 1 lo 2001::2/128 :: Un 0 1 19 lo fe80::c267:afff:fe0b:468c/128 :: Un 0 2 3 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 50 lo
Ping from Guest OS to Gig 2/2:
root@qemux86:~# ping6 3001::1 PING 3001::1(3001::1) 56 data bytes 64 bytes from 3001::1: icmp_seq=1 ttl=64 time=2.39 ms 64 bytes from 3001::1: icmp_seq=2 ttl=64 time=8.26 ms ^C --- 3001::1 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1009ms rtt min/avg/max/mdev = 2.391/5.326/8.261/2.935 ms root@qemux86:~# ping6 3001::2 PING 3001::2(3001::2) 56 data bytes 64 bytes from 3001::2: icmp_seq=1 ttl=63 time=2.57 ms 64 bytes from 3001::2: icmp_seq=2 ttl=63 time=2.57 ms ^C --- 3001::2 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1008ms rtt min/avg/max/mdev = 2.573/2.574/2.575/0.001 ms root@qemux86:~#
Hello, I am trying to send a 'show version' command to my Cisco ASA using Ansible, but I am encountering the following errors and I don't know why. The same thing works for my Cisco router though. Below are some details that might be helpful. Ci...
Hi, I want to run a jsonrpc command to get the live-status of device hostname. I'm trying the below command but couldn't get succeed. Can any one help me to fix this ? Assume i got logged in and get_trans method ran successfully before exec...
Hi all i am using JNC to manage device . Trying to delete specific node on basis of node value which is key to list .
I am trying to use markdelete(Str Path) to delete my node but node able to get correct path for my node with node-name value as getting p...
we have a we-c3560x-24p switch with version 12.2 (55) SE5 that was off our network for a few years and we connected it back up to the network but it shows that there are a few devices connected to it but there is only 1 SFP connected in the G1/1. An...
Hi Experts, We are making a rest call to NSO, as part of the reply, NSO will return a response similar to the below with a Etag value: HTTP/1.1 100 ContinueServer:Allow: GET, POST, OPTIONS, HEADContent-Length: 0HTTP/1.1 201 CreatedServer:Locatio...